|
Water Filters Detailed List : Reverse Osmosis Filters
Page 1 |
Page 2 |
Page 3
Welcome to the section of Water Test Blog where you can read detailed product specifications about specific drinking water filter systems and replacement drinking water filters. To return to the main list of filters, please click here.
Culligan Compatible S7025-C Activated Carbon Cart.
Culligan S7025-C 
Your Cost: $11.99
Regular Price: $14.95 "The Culligan CompatibleS7025C Activated Carbon Cartridge is designed to remove chlorine taste odor from your drinking water. The Culligan S7025-C is designed for use with Culligan Reverse Osmosis models AC15, AC30, LC50, and H83. Alternate part numbers for the S7025-C are 00-4028-08, 00-4027-96, 00-4487-63, and 01-0000-78. "
Microline S7028 Carbon Pre-filter, RS-21-CB5
Microline S7028 
Your Cost: $19.95
Regular Price: $24.95 "The Microline S7028 Sediment Carbon Prefilter is designed to remove chlorine, tastes and odors from your water. The S7028 has a 5 micron rating and is the original part for TFC-4 3 Stage Microline and Clack RO Systems. Depending on stock you may be shippedPentek's version of this filter RS-21-CB5. The RS-21CB5 is the same as the S7028, only manufactured by Pentek. Pentek Part number 255819-43. "
Watts Kwik Change RO System WQC4 RO
Watts WQC4RO11-50PT 
Your Cost: $395.00
Regular Price: $695.00 "The Watts Kwik Change RO System WQC4 RO provides you with quality Reverse Osmosis drinking water and takes the hassle out of changing the filters. No more wrenches. No more costly visits from your local plumber or dealer to change the filter. If you can turn a door knob you can change these filters! The WQC4 RO Model WQC4RO11-50PT breaks filtration down to these 4 stages: Stage One- Sediment Filtration In this stage a five micron sediment filter traps dirt, sediment, rust particles, and other particulate matter -Change every 6 monthsStage Two - Pre-Carbon Filtraton In this stage a carbon block filter is used to reduce chlorine taste odor and other bad odors that can be found in water - Change every 6 months Stage Three - Membrane Filtration In this stage a semi-permeable membrane will remove salts, minerals, metals, bacteria, virsus, cysts, and more. (Due to the time needed to remove all these contaminants your RO system inludes a storage tank). -Change every 2 yearsStage Four - Post Carbon Filtration In this stage the water passes through a granular activated carbon cartridge with provides the final polishing and assures good tasting drinking water -Change every 12 monthsThe WQC4RO11-50PT Specifications: Typical Rejection Rate: 98% TDS (Total Dissolved Solids) Operating Pressure: 35 to 100 psi Dimensions: 12" x 12" x 3" Other Features Benefits of the WQC4 Series RO: Color Coded Cartridges connect directly to the unit by a simple 1/4 turn No messy filter housings to deal with Internal valves shut off flow when cartridges are removed Cartridges have double o-rings so they won't leak Compact Design takes up less room under your sink! Back-Flow prevention valves are installed between the elements for water quality assurance The RO-PRO Storage Tank is only 9" wide so it also takes less space Top Mount Faucets Make Installation Easier! This Kwik Change RO System comes with 1 Tank, 1 RO System, 1 Parts Bag, 1 Faucet Bag, 1 Manual, and a Warranty Card. Other parts recommended for installation inlude: 1 1/4" Hole Saw Bit, Adjustable Wrench, Sharp Knife, 1/2" Open End wrench, Phillips Screw Driver, Needle Nose pliers, electric drill. "
Aqua Pure RO3RC Replacement Filter Kit
Aqua-Pure RO3RC 
Your Cost: $75.00
Regular Price: $134.83 "The Aqua Pure RO3RC Replacement Filter Kit includes all the replacement filters for the APRO3 Reverse Osmosis System, except for the membrane. Includes two AP397E-3 Carbon Filters, and one AP390E Sediment Pre-Filter. Also known as part 6850801, 68508-01. The R03RC filters should be replaced every 6 months for optimum performance. "
GE Osmonics Desal TFM-36 Membrane
GE Osmonics TFM-36 
Your Cost: $44.00
Regular Price: $50.00 "The TFM-36 Membrane by Desal is a 36 Gallon Per Day, thin film composite, Dry Membrane that can be used in many reverse osmosis systems. Also known as part number 1220190. Serial Number 3997281. This membrane is interchangeable with Filmtec and Ultratek membranes with the same capacity, including the Filmtec TW30-1812-36. The TFM-36 Specifications: Average NaCl Rejection: 98% Permeate Flow @ 65 psi: 36 GPD Dimensions: Tip to Tip = 11.75" Filter Body Length, not including tips = 10" Diameter of Filter Body: 1.8"(See Spec Sheet for Further Details)For best results this filter should be changed every 2-5 years based on water quality and usage. "
Filmtec TW30-1812-24 RO Membrane
Filmtec TW30-1812-24 
Your Cost: $38.00
Regular Price: $52.00 "The Filmtec TW30-1812-24 RO Membrane is a 24 GPD Thin Film Composite reverse osmosis membrane. Dow Filmtec Part number 93430. Filmtec home drinking water elements are rated at 50 psi and will purify about 20% more water than competitive elements rated at 60 psi. The TW30-1812-24 can be used in many Reverse Osmosis Systems that require a 24 GPD membrane. The Dow Filmtec TW30-1812-24 RO Membrane Specifications: Dimensions: 1.75" x 11.75" Max Operating Temp: 113 F Max Operating Pressure: 300 psig Max Feed Flow Rate: 2 GPM Max Feed Silt Density Index (SDI): 5 Free Chlorine Tolerance: <0.1 ppm NSF/ANSI Standard 58 Tested and CertifiedThis membrane removes or reduces the following contaminants: arsenic, barium, chromium, cadmium, copper, cysts, fluoride, lead, radium, selenium, turbidity, TDS, nitrate, nitrite, magnesium, calcium, sodium, nickel, mercury, zinc, iron, ammonium, bicarbonate, sulfate, tannin, chloride, bromide, and sediment. For best results the TW30181224 should be changed every 2 to 5 years based on water quality and usage. Prefilters should be changed regularly to extend the life of your RO Membrane. Also known as part number TW30-1812-24DProduct Specifications Sheet"
Click Here for Additional Air & Water Filters
| 
